Specification of Solar Panel

Solar Panel - Data:
   We are going to watch few Solar Panel specification:

Pmax:

           Pmax is Maximum Power generate on module.

           50Wp - 50Watts at peak (module power maximum 50w)

Vmp:

           Vmp - Maximum Voltage at Peak.

           Maximum Voltage at peak value - 17.82V. So maximum voltage on module.

Imp:

           Imp - Maximum Current at Peak.

           Maximum Current at peak value - 2.83A.

Voc:

           Voc - Open Circuit Voltage of Module.

           At peak, Open circuit voltage is 22.11V.

Isc:

         Isc - Short Circuit Current of Module.

         when Positive (+) & Negative (-) is shorted, current flow is called Short circuit current.

         Isc = 3.03A

Max. System Voltage:

         Maximum system voltage is connected, Operating system. Its DC bus voltage of the system (String Inverter, Power Optimizer, MicroInverter). 

           Maximum system voltage = 1000V

above details are mention 50W solar panel.

Pmax:
         Maximum Power of the module
             Pmax = 250Wp

Power Tolerance:
             Solar Panel is always procedure equal to the power output or small greater/smaller than value of actual power.
      Power tolerance ± 3%
+3% Power Tolerance - 257.5watts
-3%  Power Tolerance - 242.5watts
   Power Tolerance - 242.5w - 257.5w

Cell Technology:
             Mono-Si
       Monocrystaline Silicon

Vmp:
      Vmp - Maximum Power Voltage
      Maximum Voltage at peak power generation on Solar module.

Imp:
       Imp - Maximum Power Current
       Maximum Current flow at peak condition.

Voc:
       Voc - Open circuit Voltage
       Without any load connection in module, the maximum voltage generate at peak.

Isc:
        Isc - Short Circuit Current of Module.

         when Positive (+) & Negative (-) is shorted, current flow is called Short circuit current.

         Isc = 8.07A

Weight:

         Weight of the solar module

Nominal Operating Cell Temp. (NOCT)

         Actual Operating temperature of cells

             45±2°C = 43°C to 47°C

Max. System Voltage:

         Maximum system voltage is connected, Operating system. Its DC bus voltage of the system (String Inverter, Power Optimizer, MicroInverter).

Maximum Series overcurrent protection device rating:

         Maximum Series current breaker/Fuse rating is 12A.

Operation Temperature:

         Module Operating with in range of temperature.

         Temperature - 40°C to 85°C

85°C is too high. Solar cell getting heat. To reduce the efficiency.